Solutions / Solar panel inspection
Find the fault before the yield.
Thermal and visual drone inspection for solar across utility-scale and rooftop plants — every anomaly mapped to the module that owns it.
Campaign coverage
100+ MWp per mobilisation
Sensing
Radiometric thermal + RGB
Output
Geotagged fault map + report
Detection
Cell-level anomalies
What we detect
Four checks, one pass.
Hotspots and hot cells
Radiometric thermal scanning across the array to surface hotspots, hot cells, bypass-diode faults, and PID before they erode generation.
Cracks, soiling, delamination
High-resolution RGB for micro-cracks, soiling, snail trails, delamination, and physical damage across modules and trackers.
Fault map to string and table
Every anomaly geotagged and addressed to its string, table, and inverter, so O&M crews walk straight to the module.
IEC-aligned deliverables
Severity-classified defect registers and reporting aligned to IEC 62446-3, suitable for warranty claims and O&M handover.
Where it operates
From utility plants to rooftops.
Six segments across the solar asset lifecycle. The processing stack underneath is the same; the inspection cadence on top is specific to the asset.
Utility-scale ground-mount
Full-plant thermal and visual campaigns for IPPs and asset owners, on a scheduled cadence.
Rooftop and C&I
Commercial and industrial rooftops where access is difficult and downtime is costly.
Floating solar
Reservoir and pond installations where boat-based inspection is slow and limited.
O&M and warranty
Recurring health checks and evidence packs for module and EPC warranty claims.
Commissioning
Acceptance-stage baselines for EPCs and lenders before handover.
Acquisition due diligence
Independent condition assessment for portfolio acquisition and refinancing.
What makes Kodainya different
Inspection software, not just inspection flights.
Most inspection vendors are operators who happen to ship images. Kodainya is a software company. Your operator runs the missions; our stack turns the thermal data into an addressed defect register your O&M crew can act on.
How you buy this
Three ways to deploy.
Data as a service
Kodainya coordinates with our licensed operator partner to fly. We process. You get the finished fault map and report, ready for O&M.
Talk to usPlatform as a service
Your team flies with your own licensed operator. Kodainya’s stack processes, hosts, and serves results through a portal you control.
Talk to usSovereign deployment
Kodainya’s inspection software deployed inside your network and your perimeter. Your operator flies. Your data never leaves.
Talk to usKodainya is in active build. To deliver complete capabilities today, some products and services described on this page are sourced from licensed operator partners and third-party vendors. We are transparent about what is ours and what is partnered in every engagement.
Next step
Plan an inspection.
Single plant or a national portfolio — start with engineering.